Boards and Plates

  • Filter by Type

  • SOLD OUT
    Deluxe Pro Angler Board Quick View
    Deluxe Pro Angler Board

    Deluxe Pro Angler Board

    $ 76.99

    This product is sold out

    If you have a Hobie Pro Angler, and you have ever kicked your rods while they were stored in the horizontal rod holders, you may need a set of the new Deluxe Pro Angler Boards. These sleek contoured replacement boards are just a little wider than the stock board that come on the Pro Angler, keeping your feet away from your rods. The extra width also gives you more surface area to work on or outfit. One side has been precut with places for securing pliers, fish grips, jar baits and your favorite bottle of fish attractant. Slots running down the side allow you to strap on a small dry box or radio. They also come pre-drilled for using our TDA (Transducer Deployment Arm).

    Install instructions - Remove the rod holder tubes, so you can get to the nuts.
    This will go easily until you go to remove the top inside screw, as you can't quite get to it because
    the boards are in the way. To get around this, remove the two screws closest to the paddler on the sideboards
    they are screwed into inserts so they are easy to remove).
    Then flex the sideboards up enough to undo the last screw holding on the rod holder tubes.
    Once the rod holder tubes are out of the way you can get to two nuts holding on the front of the sideboards.
    You'll have to do the reverse this process to put the new ones back on.
    When you put the new ones on leave the front two bolts a little loose so that you'll be able
    to line up the holes on the other two screws holding on the sideboards.
    You should be able to snake a wrench up over the rodholder tubes to tighten up the front two srews.
  • HD Track Mount, Includes 1.5'' RAM® Ball HD Track Mount, Includes 1.5'' RAM® Ball Quick View
    HD Track Mount, Includes 1.5'' RAM® Ball

    HD Track Mount, Includes 1.5'' RAM® Ball

    $ 29.95

    The HD Track Mount is a heavy duty and non-rotating alternative to the Screwball. Use for trolling baits and other situations where excessive forces may be experienced. The RAM® 1.5" aluminum ball base and 1/2" thick track plate attach to your kayak's tracks with a t-bolt, while a pin prevents rotation.
  • Johnny Bar

    Johnny Bar

    $ 67.99
    Quick View
    Johnny Bar

    Johnny Bar

    $ 67.99

    The perfect application for the kayak fisherman who doesn't want to drill holes in his/her boat.
    Black in color
    27 3/4" in Length, 1 3/4" x 5 3/4".
    Durable and stable.
    Choose either Brass Clips or Scotty Nylon Clips to attach to your boat.
    Attachment point can be pad eyes or leader line threaded through your boat rigging hardware. See picture below. We will be adding the attachment packet using the leader line soon.
    Get creative and make your own optional mounting surfaces using cutting board. Johnny Bar does not come with optional mounts seen. These options may be available at a later date. Picture shows the Scotty Baitcaster on the Johnny Bar.
    For more information see the Johnny Bar home: www.madfroggear.com
  • SOLD OUT
    Sideboard Mini Sideboard Mini Quick View
    Sideboard Mini

    Sideboard Mini

    $ 24.99

    This product is sold out

    Side Board Mini to be used with the Slide Track system on the Wilderness Kayak.

    Measures - 7 x 2 1/2"

    Comes with shown hardware

     

  • Slide Trax Sideboard Slide Trax Sideboard Quick View
    Slide Trax Sideboard

    Slide Trax Sideboard

    $ 28.99

    Slide Track Sideboard - Used with the Wilderness Kayak Track System

    10 x 4.5"

    Comes with necessary hardware and predrilled holes.

    You can drill your own to customize this product.

    View other pictures to see all components.

     

  • SOLD OUT
    Slide Trax Tool Board Quick View
    Slide Trax Tool Board

    Slide Trax Tool Board

    $ 38.99

    This product is sold out

    This is a great Tool Board to be used with the Johnny Bar or the Dashboard by Mad Frog Gear.

    It measures 10 1/2" x 4.5"

    It comes with the necessary hardware used to attach it to your "board".
  • SlideTrax Dashboard - (4" Legs Sold Separately) SlideTrax Dashboard - (4" Legs Sold Separately) Quick View
    SlideTrax Dashboard - (4" Legs Sold Separately)

    SlideTrax Dashboard - (4" Legs Sold Separately)

    $ 39.99

    SlideTrax Dashboard for Wilderness Kayak Track System - (4" Legs Sold Separately)

    24" x 4.5"

    Pre-drilled holes or drill your own to customize your Dashboard

    Comes with all necessary hardware

    View other images to see components and other pictures

     


    John Upchurch from Mad Frog Gear demonstrates using the dashboard.

  • STACK-N-STOW  Bait Board with Combination Bulkhead Rail Adapter Kit - RAP-395-RMU Quick View
    STACK-N-STOW  Bait Board with Combination Bulkhead Rail Adapter Kit - RAP-395-RMU

    STACK-N-STOW Bait Board with Combination Bulkhead Rail Adapter Kit - RAP-395-RMU

    $ 46.02

    STACK-N-STOW Bait Board with Combination Bulkhead Rail Adapter Kit - RAP-395-RMU

    The bait board with bulkhead rail adapter kit joins two plates with the screws provided and turns the flate base into a rail base. The adapter is a U shape, so it can wrap around a tube mount and the clamp by joining to the flat base. The bait board will also accomodate pipes and extension poles with a diameter of 1".

    Bait Board Dimensions:

    Length: 10"

    Width: 13"

    Depth: 1.625"

    Material:

    High Strength Composite

    Product Number:

    RAP-395U

    Compatible Mounts
  • STACK-N-STOW  Stand Alone Bait Board - RAP-395U Quick View
    STACK-N-STOW  Stand Alone Bait Board - RAP-395U

    STACK-N-STOW Stand Alone Bait Board - RAP-395U

    $ 29.30

    STACK-N-STOW Stand Alone Bait Board - RAP-395U

    The RAM stand alone bait board includes the universal AMPs hole pattern, located on the bottom of the board, easily mount to your existing ball-and-socket mount or choose from an assortment of compatible RAM mounts. The bait board will also accomodate pipes and extension poles with a diameter of 1".

    Bait Board Dimensions:

    Length: 10"

    Width: 13"

    Depth: 1.625"

    Material:

    High Strength Composite

    Product Number:

    RAP-395U

    Compatible Mounts RAP-101U

    RAM-101U

  • SOLD OUT
    Tool Board

    Tool Board

    $ 28.99
    Quick View
    Tool Board

    Tool Board

    $ 28.99

    This product is sold out

    This is a great Tool Board to be used with the Johnny Bar or the Dashboard by Mad Frog Gear.

    It measures 10 1/2" x 4.5"

    It comes with the necessary hardware used to attach it to your "board".

  • YakAttack HD Ball Mounting Plate with Hardware Quick View
    YakAttack HD Ball Mounting Plate with Hardware

    YakAttack HD Ball Mounting Plate with Hardware

    $ 11.95

    YakAttack Round Base RAM Ball Mounting Plate

    Contents

    • (1) 3" x 4 " UV-resistant, high-density Polypropylene base.
    • (1) 1-1/4" MightyBolt
    • (1) Threaded T-knob
    • (1) Washer
    • (4) Short (5/8") bolts (for RAM Ball Mount)
    • (4) Lock nuts

    Features

    • Compact, high-density mounting plate
    • UV-resistant, rugged Polypropylene
    • Mighty bolt and peg prevent base from rotating
    • Securely fastens to GearTrac and other track systems
    • Works with round or diamond base RAM balls
  • YakAttack HD Combo Plate with Hardware Quick View
    YakAttack HD Combo Plate with Hardware

    YakAttack HD Combo Plate with Hardware

    $ 21.95

    YakAttack HD Combo Plate with Hardware

    Attach RAM bases to GearTrac and other track systems.

    Contents

    • (1) 3" x 7 " UV-resistant, high-density Polypropylene base.
    • (1) 1-1/4" MightyBolt
    • (1) Threaded T-knob
    • (1) Washer
    • (4) Short (5/8") bolts (for RAM Ball Mount)
    • (2) Long (3/4") bolts (for RAM Ball Diamond Mount)
    • (6) Lock nuts

    Directions

    1. Line up a 1" RAM Ball Mount (not included) over the holes on one end of the Combo Plate and attach it using the four long bolts and lock nuts. You'll use this to attach the SONAR/GPS unit.
    2. Attach a RAM diamond base ball mount (not included) to the other end using the two short bolts and lock nuts. This will be used to attach the transducer arm.
    3. Slide the enclosed MightyBolt into a GearTrac
    4. Lower the Combo Plate, RAM balls up and guide pegs down, over the MightyBolt.
    5. Screw a threaded T-knob onto the MightyBolt
    6. Position the Combo Plate and then tighten the T-knob to secure the unit.

    Note:If desired, a second round-base RAM Mount may be attached instead of the diamond-base RAM Mount. Hardware is included only for the diamond-base mount.)

Join our Mailing List