Filter by Size
Filter by Color
Boonedox Rudder$ 69.95
Includes stainless 1/4-20 mounting bolt. Simple to exchange with stock rudder on Native's Slayer. Propel and Mariner Propel kayaks. Made in North Carolina.
- Material: Aluminum
- Colors: Orange or Lime
- Length: 15 1/2"
- Height: 5"
- Weight: 1.5 lbs.
booneDOX Safety Flag$ 9.95
BooneDox The Drifter$ 239.95
BooneDox The Drifter
All made in USA and still all beach-friendly aluminum, The Drifter collapsable hammock stand packs up like a camping chair, and the payoff down the road is well worth the 22 lb. carrying weight. Carry it to the beach, music festivals, ballgames, or your living room, and be the envy of anyone still sitting around in a chair. Useable with nylon camping hammocks.
H-RAIL LIFTER KIT$ 11.95
H-RAIL LIFTER KIT
$ 11.95Pre 2015 Hobie Pro Angler kayaks require the "H-Rail Lifter" kit to lift and space the H-Rail to accommodate the Landing Gear LG Pro Kit directly behind the seat. The H-Rail Lifter includes 2 powder coated aluminum spacers along with (2) 5/16-18 stainless steel bolts.
HOBIE OUTBACK LANDING GEAR MOUNTING KIT
$ 32.95Due to the design of the Outback, the Landing Gear previously had to be mounted towards the rear of the boat. We designed this kit to enable you to place your Landing Gear directly behind your seat on the Hobie Outback. This location requires two round bar backing plates, and a center spacing bar to be measured at 20". The round spacers will reside against the inside edge of the rib, giving you more centered placement and a much better balance of weight.
The BooneDOX J Cradles give your kayak great support, and they give you peace of mind riding down the road. The J-Cradles are welded out of Air-Craft grade aluminum. The Upright measures 24" and the front angle measures 8", providing plenty of surface space to hold small and larger boats in the cradle. Both pieces are protected by high-density foam pads, and covered by weather proof sleeves. The J-Cradles are rated to safely hold kayaks up to 125 lbs. in weight. The J-Cradles were designed specifically for the BooneDOX KT, but will attach to various other items using the four U-Bolts and their reinforcement tubes.
U-Bolt Measurements: .375 x 2 x 5
KT-KAYAK TRAILER$ 1,599.00
The Boonedox Kayak Trailer combines Air-Craft grade aluminum with a Torflex axle to give you a strong, lightweight option for transporting your kayaks. The KT allows you to determine how many boats to carry, and in what manner. This customization will allow you to place your cargo in whichever configuration works best for you. You will have the option to place your kayaks directly on the trailer for strapping, or purchase Boonedox J-Cradles for an angled carry. The 80 1/2" width crossbars give you more than enough room for two-three kayaks. Pictured to the side, notice one of our KTs with two sets of cradles, and SUPs stacked on the remaining space. Lots of different possibilities.
As mentioned above, the KT is constructed with rust free aircraft grade aluminum, bringing the total trailer weight to 170 lbs. This lightweight design enables travel with a almost any vehicle using a 2" attachment ball.
Best Part? The KT will be delivered straight to your front door via UPS, accompanied by step-by-step instructions. The KT can be put together using minimal tools in about 2 hours for a well-seasoned toolman, or 3-4 hours for a gumshoe.
Landing Gear by booneDOX$ 249.95
Landing Gear by booneDOX
Kayak Wheel System - wheels attach, deploy, and retract without having to tip the kayak over on side. Includes gear groove for mounting fishing accessories. Made in North Carolina... always will be.
- Color: Silver legs, black body, orange extension bar.
- Material: Stainless legs, aluminum body, stainless hardware, solid no-flat wheels
- Weight: 14 lbs.
- Size: Expands from 17" to 27" width.
- When used with a Hobie Pro Angler, you must order the LG Pro Kit in addition
LG PRO KIT$ 14.95
LG PRO KIT
$ 14.95Enables Landing Gear to be installed on Hobie Pro Angler kayaks directly behind the seat, creating better weight distribution on the wheels and providing tons of gear storage within easy reach.
T-BONE BED EXTENDER$ 189.95
T-BONE BED EXTENDER
$ 189.95T-BONE BED EXTENDER
The T-BONE is an adjustable truck bed extender that features aircraft grade aluminum formed into a radial curve. This allows the consumer to enter and exit elevated surfaces without the worry of dragging and damaging their products. Made of aircraft grade aluminum ensures strength without the weight of steel.
Adjustable to fit the various heights from different vehicle manufacturers.
Tandem (two-boat wide) model: 58 inches wide
The T-BONE is great for hauling Canoes, Kayaks, construction materials, ladders and other long items that stick out the tailgate of your vehicle.
The T-BONE comes powder coated orange for safety
- LIME GREEN
Please note express/expedited shipping is not available for this item.
T-BONE Pad$ 24.95
Custom made pads to help protect your bed extender and your Kayak. These pads also act as a roller when used on the tandem T-BONE.
Made from durable outside fabric with a strong Velcro, these pads are sure to last you a long time.
Note: Purchase two pads for Tandem T_BONE in order to have one pad on each side of the tongue.
This product is not eligible for express/expedited shipping. Please allow 5 business days for this item to ship.