Hardware and Small Parts

  • Filter by Type

  • Filter by Color

  • SOLD OUT
    Brass Swivel Trigger Snap Quick View
    Brass Swivel Trigger Snap

    Brass Swivel Trigger Snap

    $ 2.95

    This product is sold out

    Brass Swivel Trigger Snap - 2 11/16" in length - Sand Cast Brass

  • Buckle Clips - 1" (2) Quick View
    Buckle Clips - 1" (2)

    Buckle Clips - 1" (2)

    $ 3.95

    Buckle Clips - 1" - Price is for a set of two

  • Buckle Clips - 1-1/2" (2) Quick View
    Buckle Clips - 1-1/2" (2)

    Buckle Clips - 1-1/2" (2)

    $ 5.95

    Buckle Clips - 1-1/2" - Price is for a set of two

  • Buckle Clips - 2" (2) Quick View
    Buckle Clips - 2" (2)

    Buckle Clips - 2" (2)

    $ 7.95

    Buckle Clips - 2" - Price is for a set of two

  • Bungee Block Kayak Deck Fitting Quick View
    Bungee Block Kayak Deck Fitting

    Bungee Block Kayak Deck Fitting

    $ 0.70

    Deck Fitting - Bungee Block
    Length - 1 7/16"
    Width - 1/4"
    Height - 15/16"
    Hole Diameter - Appx 1/8"
    This deck fitting is typically used to splice or tie a line together. It is used to connect the rope that loops a rudder together. The line is fed in through the small hole, a knot is tied and then pulled tight back into the fitting. Then run the cable to the rudder and back up to the cockpit. Feed the line through the fitting and tie it off. It makes for a nice fitting to grab onto when pulling rudder hauling.
  • Bungee Button Quick View
    Bungee Button

    Bungee Button

    $ 0.75

    Injection-molded, polypropylene kayak "tall bungee button" deck fitting. Screw this countersunk, open guide to your kayak deck with a flathead screw.

    • A: 3/4"
    • B: 1/2"
    • C: 3/8"
    • D: 7/16"
    • Fastener #10 OH
    • Weight: 0.01 lb
  • Bungee Knob Quick View
    Bungee Knob

    Bungee Knob

    $ 0.75

  • Bungee Termination End - 1/4" Quick View
    Bungee Termination End - 1/4"

    Bungee Termination End - 1/4"

    $ 0.75

    Bungee Termination End to use with 1/4" bungee

  • Cable Clamps (1) Quick View
    Cable Clamps (1)

    Cable Clamps (1)

    $ 0.10

    Cable Clamp
    Opening - 1/4"
    Width - 3/8"
    Hole size - 3/16"
  • Clamcleat - Large Quick View
    Clamcleat - Large

    Clamcleat - Large

    $ 7.99

    Large Clamcleat fits 1/4" - 1/2" rope, 4 13/16" in length and 1 1/8" in width
    Use Hardware Set N or O with this product.
  • Clamcleat - Small Quick View
    Clamcleat - Small

    Clamcleat - Small

    $ 3.99

    Small Clamcleat, fits rope 1/8" to 1/4", 2 1/16" in length and 5/8" in width.
    Use hardware set L or M with this product.
  • Clamcleat Fine Line Port Quick View
    Clamcleat Fine Line Port

    Clamcleat Fine Line Port

    $ 4.99

    CLAMCLEAT CL214 FINE LINE PORT

  • Clamcleat Fine Line Starboard Quick View
    Clamcleat Fine Line Starboard

    Clamcleat Fine Line Starboard

    $ 4.99

    CLAMCLEAT CL213 FINE LINE STARBOARD

  • Convertible Knobs, 1/4-20 Threads, 6 pack Convertible Knobs, 1/4-20 Threads, 6 pack Quick View
    Convertible Knobs, 1/4-20 Threads, 6 pack

    Convertible Knobs, 1/4-20 Threads, 6 pack

    $ 9.95

    In standard YakAttack fashion, this knob does more than meets the eye. Purchased as a 1/4-20 female knob, it can be quickly converted to a 1/4-20 male knob by simply installing a socket head cap screw through it.
    CK1420-6
    • Crimps / C-Ring (4) Quick View
      Crimps / C-Ring (4)

      Crimps / C-Ring (4)

      $ 0.20

      Sold in sets of 4

    • SOLD OUT
      Deck Line Guide, Slotted, Round Quick View
      Deck Line Guide, Slotted, Round

      Deck Line Guide, Slotted, Round

      $ 0.99

      This product is sold out

    • Fairlead 3/8" Quick View
      Fairlead 3/8"

      Fairlead 3/8"

      $ 1.49

      Height - 3/4"
      Opening - 3/8"
      Width - 7/16"
      Length - 1 1/8"
    • Fast Eye Boat Snap Quick View
      Fast Eye Boat Snap

      Fast Eye Boat Snap

      $ 2.25

      Brass Fast Eye Boat Snap - 2 7/8" in length.
    • Folding Clip 1 1/4" Quick View
      Folding Clip 1 1/4"

      Folding Clip 1 1/4"

      $ 4.99

      1 1/4" Folding Clips - Holds gear and folds down flush when not in use. - Sold in Pairs

    • Folding Clip 1" Quick View
      Folding Clip 1"

      Folding Clip 1"

      $ 4.99

      1" Folding Clips - Holds gear and folds down flush when not in use. - Sold in Pairs

    • GearTrac Hardware Assortment Kit GearTrac Hardware Assortment Kit Quick View
      GearTrac Hardware Assortment Kit

      GearTrac Hardware Assortment Kit

      $ 19.95

      Includes four of each: Convertible Knobs, 1-1/2'' MightyBolts, Track Nuts, 1-1/4'' Socket Head Cap Screws. All standard 1/4-20 thread.
      • 4 Stainless Steel MightyBolts
      • 4 Convertible Knobs
      • 4 Track Nuts
      • 4 Socket Head Cap Screws
      • All Standard 1/4-20 Thread

      HRC-1004

      • Hardware Set A (4) Quick View
        Hardware Set A (4)

        Hardware Set A (4)

        $ 1.50

        Hardware Set A for Paddle Clips (4)
        Set of 4 stainless steel #10 x 1" Taper Screws and Washers
      • Hardware Set B (4) Quick View
        Hardware Set B (4)

        Hardware Set B (4)

        $ 1.25

        4 Stainless Steel Taper Screws to be used with Scotty Products
        1/4" x 1" Taper Screws - Stainless Steel (4).
      • Hardware Set C (4) Quick View
        Hardware Set C (4)

        Hardware Set C (4)

        $ 1.25

        4 - #10 x 1" Stainless Steel Taper Screws for Ram Products

      • Hardware Set D (4) Quick View
        Hardware Set D (4)

        Hardware Set D (4)

        $ 2.25

        #10 x 1" Stainless Steel machine screws, washers and nylon lock nuts - Set of 4
        For RAM Products
      • Hardware Set E (4) Quick View
        Hardware Set E (4)

        Hardware Set E (4)

        $ 3.00

        1/4" x 1 1/4" Machine Screws, Washer and Nylon Lock Nut (4 of each)
        This hardware set is to be used with Scotty products.
      • SOLD OUT
        Hardware Set F (3) Quick View
        Hardware Set F (3)

        Hardware Set F (3)

        $ 0.99

        This product is sold out

        Set of 3 - #14 x 1" Oval Phillip Stainless Steel screws
        To be used with the SEA-Dog Flush Mount Rod Holders
      • Hardware Set G (4) Quick View
        Hardware Set G (4)

        Hardware Set G (4)

        $ 0.50

        Stainless Steel #6 x 1/2" Phillip Pan Screws (4).
        This hardware set can be used with our Lashing Hooks and when you are making a Kayak Stand.
      • Hardware Set H (4) Quick View
        Hardware Set H (4)

        Hardware Set H (4)

        $ 0.75

        Set of 4 - Stainless Steel #10 x 1/2" Phillip Pan Screws. This Hardware Set is to be used with the J Hooks.

      • Hardware Set I (8) Quick View
        Hardware Set I (8)

        Hardware Set I (8)

        $ 1.00

        8 - Stainless Steel #10 x 3/4" Flat Head Phillips.

        Works great for nylon pad eyes and fine line clamcleats.

      • Hardware Set J (2) Quick View
        Hardware Set J (2)

        Hardware Set J (2)

        $ 0.75

        2 - Stainless Steel #8 x 1 1/4" Oval Phillip Taper Screws. This Hardware Set is to be used with the Nylon Open Base Cleat.

      • Hardware Set K (2) Quick View
        Hardware Set K (2)

        Hardware Set K (2)

        $ 0.50

        2 - Stainless Steel #8 x 1 1/4" Oval Phillip Taper Screws. This Hardware Set is to be used with the Nylon Open Base Cleat.

      • Hardware Set L (2) Quick View
        Hardware Set L (2)

        Hardware Set L (2)

        $ 0.75

        2 - Stainless Steel 8-32 x 1" Phillip Oval Machine Screws and Lock Nuts. This Hardware Set is to be used with the Small Clamcleat.

      • Hardware Set M (2) Quick View
        Hardware Set M (2)

        Hardware Set M (2)

        $ 0.50

        2 - Stainless Steel #8 x 3/4" Taper Screws. This Hardware Set is to be used with the Small Clamcleat.

      • Hardware Set N (2) Quick View
        Hardware Set N (2)

        Hardware Set N (2)

        $ 1.00

        2 - Stainless Steel 1/4" x 1" Machine Screws and Lock Nuts. This Hardware Set is to be used with the Large Clamcleat

      • SOLD OUT
        Hardware Set O (2) Quick View
        Hardware Set O (2)

        Hardware Set O (2)

        $ 0.75

        This product is sold out

        2 - Stainless Steel #14 x 1" Taper Screws. This Hardware Set is to be used with the Large Clamcleat.

      • Hardware Set P (8) Quick View
        Hardware Set P (8)

        Hardware Set P (8)

        $ 1.00

        Hardware Set P (8) size 10x3/4 used with Rivet Pad Eyes

      • Hardware Set Q (4) Quick View
        Hardware Set Q (4)

        Hardware Set Q (4)

        $ 1.75

        Stainless Steel Hardware Set Q - (4)
        This hardware set works well with the Side Fixing ClamCleat, J Hooks, Round Deck Fittings. This will give you a secure install with screws, washers and locknuts.
      • SOLD OUT
        Hardware Set R (8) Quick View
        Hardware Set R (8)

        Hardware Set R (8)

        $ 1.00

        This product is sold out

        Stainless Steel Hardware Set R (8)
        This hardware set works well with Tall Bungee Buttons, Small Deck Fittings, and Bungee Knobs.
      • Harmony Plastic Push Rivet - 5 pk Quick View
        Harmony Plastic Push Rivet - 5 pk

        Harmony Plastic Push Rivet - 5 pk

        $ 3.99

        Harmony Plastic Push Rivet - 5 Pack

        The Harmony Push Rivet pack contains 5 plastic push rivets. Push rivets are typically used to attach seat cushions. Push rivets are removable, but may not be re-usable once removed.

        Pack contains 5 rivets

        Removable, but may not be re-usable once removed

        Item#: 9926

        Diameter: 0.56 in / 1.4 cm

        Material(s): Plastic

      • SOLD OUT
        Harmony SlideTrax Molded Fitting - 2 pk Quick View
        Harmony SlideTrax Molded Fitting - 2 pk

        Harmony SlideTrax Molded Fitting - 2 pk

        $ 5.99

        This product is sold out

        Harmony SlideTrax Molded Fitting - 2 pk. For use on Wilderness Systems SlideTrax

        Hardware Sold Separately

        The Harmony SlideTrax Molded Fitting 2 pack contains two plastic molded SlideTrax fittings.
      • Knob - 1/4-20 Threads - 6 pack Quick View
        Knob - 1/4-20 Threads - 6 pack

        Knob - 1/4-20 Threads - 6 pack

        $ 5.95

        6 pack of threaded knobs feature 1/2-20 threads and are compatible with any of the YakAttack MightyBolts.
        • Six 1/4-20 knobs
      • Ladder Lock Quick View
        Ladder Lock

        Ladder Lock

        $ 0.99

      • SOLD OUT
        Large Clip Quick View
        Large Clip

        Large Clip

        $ 3.49

        This product is sold out

        Large Clip -
        3 1/4" in length
        Clip Opening - 5/8"
        Width and Height - 1 3/16" x 7/16"
        Hole Diameter - 7/16"
      • Lashing J Hook, 1-hole Quick View
        Lashing J Hook, 1-hole

        Lashing J Hook, 1-hole

        $ 0.75

        J Hook - Hardware Set H can be used with this product

      • Lashing J Hook, 2-hole (Small) Quick View
        Lashing J Hook, 2-hole (Small)

        Lashing J Hook, 2-hole (Small)

        $ 0.99

        Black nylon lashing Hook - 3/8" in height. Hardware Set G can be used with this product.

      • MightyBolt, 1/2 wide, 6 pack MightyBolt, 1/2 wide, 6 pack

        MightyBolt, 1/2 wide, 6 pack

        from $ 12.95 - $ 14.95
        Quick View
        MightyBolt, 1/2 wide, 6 pack

        MightyBolt, 1/2 wide, 6 pack

        $ 12.95

        Six stainless steel Mighty Bolts with 1/2" wide head.
        • Six stainless steel MightyBolts
        • 1", 1.5", 1.75'', or 2"  Long Stud
        • 1/2" Wide Head
        • 1/4-20 Threading
      • Molded Hook Quick View
        Molded Hook

        Molded Hook

        $ 0.75

        Molded Hook and Collar for use with 1/4" Bungee Cord

        Clip your 1/4-inch bungee cord or deck line to a pad eye using this strong, nylon hook.

        Features

        • One hook and collar per set
        • Durable, black, injection-molded nylon
        • Easy to assemble
      • Molded Locking Hook Quick View
        Molded Locking Hook

        Molded Locking Hook

        $ 0.75

        Molded Locking Hook 1/4"

      • Nylon Ring 1 1/4" Quick View
        Nylon Ring 1 1/4"

        Nylon Ring 1 1/4"

        $ 1.75

        Sea Dog Nylon Ring - 1 1/4" inside diameter; 9/32" width of ring

      • Nylon Ring 2" Quick View
        Nylon Ring 2"

        Nylon Ring 2"

        $ 2.25

        Sea-Dog Nylon Ring - 2" inside diameter; 9/32" width ring

      • Oblong Eye Plate Quick View
        Oblong Eye Plate

        Oblong Eye Plate

        $ 2.99

        Stainless Steel Oblong Eye Plate
        Length - 2 1/8"
        Width - 5/8"
        Height - 7/8"
      • Pad Eye 3/8" Nylon Rivet-mount 4-pack Pad Eye 3/8" Nylon Rivet-mount 4-pack Quick View
        Pad Eye 3/8" Nylon Rivet-mount 4-pack

        Pad Eye 3/8" Nylon Rivet-mount 4-pack

        $ 1.25

        Black nylon Pad Eyes that can be used with Klamptite Rivets or Set P hardware. 4 per package

      • Pad Eye 3/8" Nylon Screw-mount 4-pack Pad Eye 3/8" Nylon Screw-mount 4-pack Quick View
        Pad Eye 3/8" Nylon Screw-mount 4-pack

        Pad Eye 3/8" Nylon Screw-mount 4-pack

        $ 1.25

        Nylon Pad Eyes with countersunk holes. 4 per package, without hardware - Hardware Set I (flathead screws) can be used with this product.

      • Pulley 1/4" Sheave Stainless Steel Quick View
        Pulley 1/4" Sheave Stainless Steel

        Pulley 1/4" Sheave Stainless Steel

        $ 4.99

        Sea-Dog Stainless Steel Pulley with Plastic Sheave

        Specifications

        • A (Line Diameter): 1/4"
        • B: 1"
        • C: 1-13/16"
        • D: 1/2"
        • Sheave: Plastic
        • Weight: .04 lb.
        • Std. Pack: each
      • SOLD OUT
        Sea Dog Shock Cord Clip Quick View
        Sea Dog Shock Cord Clip

        Sea Dog Shock Cord Clip

        $ 1.25

        This product is sold out

        Sea Dog Shock Cord Clip to use with 1/4" bungee

      • Sealect Designs  Rivet Tool Handheld Quick View
        Sealect Designs  Rivet Tool Handheld

        Sealect Designs Rivet Tool Handheld

        $ 24.99

        SEALECT Designs Handheld Rivet Tool - 4 Nose Pieces for 3/32"-3/16" Rivets

        The SEALECT Designs rivet tool is a heavy-duty all-steel rivet tool, perfect for handheld applications. It features a slim-nose design to fit into tight places. The rivet tool is versatile enough for steel or aluminum rivets and can handle a variety of different diameters and grip ranges. This tool is perfect for fastening metal, leather, plastic, and more. Includes 4 interchangeable nosepieces: 2.4mm (3/32), 3.2mm (1/8), 4.0mm (5/32) or 4.8mm (3/16).

        Features:

        - Durable black wrinkle finish with a non-slip grip handle

        - Includes 4 interchangeable nosepieces

        - Nosepieces and wrench securely store in handle

         

         

         

         

      • SOLD OUT
        Sealect Designs  Rivets DomeHead, Tri Fold  3/16 (10 PACK) Quick View
        Sealect Designs  Rivets DomeHead, Tri Fold  3/16 (10 PACK)

        Sealect Designs Rivets DomeHead, Tri Fold 3/16 (10 PACK)

        $ 4.99

        This product is sold out

        Aluminum 3/16" Trifold Rivets - 10 PACK

      • Side Fixing Clamcleat Quick View
        Side Fixing Clamcleat

        Side Fixing Clamcleat

        $ 4.99

      • Small Deck Fitting Quick View
        Small Deck Fitting

        Small Deck Fitting

        $ 0.75

        1 1/8" wide, a little over 1/2" deep.

      • Snap Hook (Scotty no.590) Quick View
        Snap Hook (Scotty no.590)

        Snap Hook (Scotty no.590)

        $ 1.60

         

      • Soft Anchor Points Quick View
        Soft Anchor Points

        Soft Anchor Points

        $ 4.99

        Used to provide larger or additional anchoring points, without drilling additional holes in your kayak.
        Package includes (4) 5" 110 lb test coated stainless cables and (4) collars
        See More Images for how-to
      • Stainless Steel Carabiner Quick View
        Stainless Steel Carabiner

        Stainless Steel Carabiner

        $ 2.99

        2 3/8" in length

      • Stainless Steel Carabiner + Eye Quick View
        Stainless Steel Carabiner + Eye

        Stainless Steel Carabiner + Eye

        $ 2.99

        2 3/8" in length

      • Stainless Steel Pad Eye Quick View
        Stainless Steel Pad Eye

        Stainless Steel Pad Eye

        $ 2.99

        304 Forges 5/16" Stainless Steel Pad Eye has two countersunk holes for mounting with flathead stainless steel screws.

      • SOLD OUT
        Stainless Steel Pad Eye to be used with rivets or flat head screws Quick View
        Stainless Steel Pad Eye to be used with rivets or flat head screws

        Stainless Steel Pad Eye to be used with rivets or flat head screws

        $ 2.99

        This product is sold out

        Stainless Steel Pad Eye used with a 3/16" pop rivet

      • Stainless Steel Ring Quick View
        Stainless Steel Ring

        Stainless Steel Ring

        $ 3.99

      • SOLD OUT
        Swivel Eye Bolt Snap, Brass, 3-5/16" Quick View
        Swivel Eye Bolt Snap, Brass, 3-5/16"

        Swivel Eye Bolt Snap, Brass, 3-5/16"

        $ 2.95

        This product is sold out

        Brass Swivel Eye Bolt Snap - 3 5/16" in length - Sand Cast Brass

      • Washers - 1/2" opening and 3/16" opening Quick View
        Washers - 1/2" opening and 3/16" opening

        Washers - 1/2" opening and 3/16" opening

        $ 0.50

        Stainless Steel Washers - 4 in a pack
        Choose from -
        1/4" opening and 1" in diameter
        or
        3/16" opening and 3/4 in diameter
      • SOLD OUT
        Web to Bungee Quick View
        Web to Bungee

        Web to Bungee

        $ 0.99

        This product is sold out

        This part will help you go from a 1/4" bungee to a 1" webbing set up.

      • YakAttack NITEStripe (Reflective) YakAttack NITEStripe (Reflective) Quick View
        YakAttack NITEStripe (Reflective)

        YakAttack NITEStripe (Reflective)

        $ 14.95

        Add NITESTripe to your kayaks and accessories to make it more visible at night. Available in Yellow, Blue, Green, Orange, Red, White, and Black.

      • SALE
        YakAttack ParkNPole Clips YakAttack ParkNPole Clips Quick View
        YakAttack ParkNPole Clips

        YakAttack ParkNPole Clips

        $ 5.00 $ 8.00

        PARKNPole clips with mounting hardware.

      • YakAttack Threaded Knob 6-pack YakAttack Threaded Knob 6-pack Quick View
        YakAttack Threaded Knob 6-pack

        YakAttack Threaded Knob 6-pack

        $ 9.95

        Threaded T-Knob with 1/4-20 Threads - 6 Pack

        Description

        • Dimensinos: 3-1/2"Lg X 2-1/2"Wd X 1"Ht Envelope
        • Weight: ~1 oz
        • Construction: High Strength Marine Grade Polymer
        • Contents: Six threaded T-knobs
      • YakAttack Tie-Down Eyelet, Track Mount, 2 pack Quick View
        YakAttack Tie-Down Eyelet, Track Mount, 2 pack

        YakAttack Tie-Down Eyelet, Track Mount, 2 pack

        $ 14.95

        These tie-downs come with a Mighty Bolt base that fits in any YakAttack GearTrac, MightyMount or most other factory installed track systems. Perfect as an anchoring point to secure a cooler or any other accessory to the track. 2 Pack
      • YakAttack Vertical Tie Downs, Track Mount, 2 pack YakAttack Vertical Tie Downs, Track Mount, 2 pack Quick View
        YakAttack Vertical Tie Downs, Track Mount, 2 pack

        YakAttack Vertical Tie Downs, Track Mount, 2 pack

        $ 19.95

        These tie-downs come with a Mighty Bolt base that fits in any YakAttack GearTrac, MightyMount or most other factory installed track systems. Perfect as an anchoring point to secure a cooler or any other accessory to the track. Designed to work with 1'' and 1.5'' flat webbing and can also be used with bungee. Sold in a 2 pack.

      • Zig Zag Cleat Quick View
        Zig Zag Cleat

        Zig Zag Cleat

        $ 4.50

        This Cleat is great for anchor systems, fender lines, trailer covers, and utility lines. Fits up to 3/8"

      Join our Mailing List