• Filter by Type

  • RAM Wedge Mount 1" Quick View
    RAM Wedge Mount 1"

    RAM Wedge Mount 1"

    $ 13.33

    Ram Ball Mount - 1" ball - RAP-B-354
    Fits Scotty and Hobie - NOT RAM FLUSH MOUNTS

    From the RAM website: "Keeping things simple and versatile, the new RAM Ball Wedge Mounts are a great way to provide a mounting point to practically anything. Simply slide the wedge into the round opening of your rod holder base and tighten the screw. The new RAM Ball Wedge Base expands to accommodate holes from 3/4”- 7/8” diameter and locks in tight. Once installed, you have the perfect way to mount anything from RAM Rod holders, GPS, Cell Phone, Cup Holder, Fishfinder, or Flash Light which can all be supported and perfectly positioned using this great new product."

    Visit the RAM website for more info - www.ram-mount.com
  • SOLD OUT
    RAM-B-102-UN7U - X-GRIP Quick View
    RAM-B-102-UN7U - X-GRIP

    RAM-B-102-UN7U - X-GRIP

    $ 46.72

    This product is sold out

    RAM-B-102-UN7U - X-Grip

  • SALE
    RAM-ROD Female Ratchet Adapter with 1.5" Ball (RAM-114BGU) Quick View
    RAM-ROD Female Ratchet Adapter with 1.5" Ball (RAM-114BGU)

    RAM-ROD Female Ratchet Adapter with 1.5" Ball (RAM-114BGU)

    $ 13.70 $ 13.84

    The RAM-ROD female ratchet adapter enables the direct attachment of a 1.5 RAM ball to any of RAMs many rod holders which use the tooth and groove system. The groove ball adapter can attach directly to the rod holder extender, as well as the short and standard length rod holder post extenders. This enables the attachment of a ball and socket rod holder at the end of a rod holder extender, the ultimate in rod holder functionality and adjustability.

    Compatible Mounts/Holders:
    1. Attaches to all spline posts with male teeth pattern.
    2. Attaches to all 1.5" sockets.

    Material:
    High Strength Composite

    Ball Size:
    1.5" Rubber Ball Size

    Note:
    The "U" in the part number reflects product packaged in poly bag.
  • SOLD OUT
    RAM-Rod Holder 8" Post Extension Arm Quick View
    RAM-Rod Holder 8" Post Extension Arm

    RAM-Rod Holder 8" Post Extension Arm

    $ 11.88

    This product is sold out

    Get your fishing rod closer to you, closer to the action, or simply out of the way with this latest extension from RAM. Rugged, high strength composite construction ensures years of performance on the water. The rod holder extender will lift your RAM-ROD holder up off of your deck and enable ideal positioning in tight spaces such as on kayaks. This extender is perfect for increasing the rod holder height when using a side mounted gunnel or transom mount.

    Arm Length: 8"

    Compatible Mounts/Holders:
    1. Attaches to all spline posts with male teeth pattern.
    2. Attaches to all rod/tube holders with female groove pattern.

    Material:
    High Strength Composite

    Note:
    The "U" in the part number reflects product packaged in poly bag.
  • SALE
    RAM-ROD Male Ratchet Adapter with 1.5" Ball Quick View
    RAM-ROD Male Ratchet Adapter with 1.5" Ball

    RAM-ROD Male Ratchet Adapter with 1.5" Ball

    $ 12.13 $ 14.16

    The RAM-ROD male ratchet adapter enables the direct attachment of a 1.5 RAM ball to any of RAMs many rod holders which use the tooth and groove system. The groove ball adapter can attach directly to the rod holder extender, as well as the short and standard length rod holder post extenders. This enables the attachment of a ball and socket rod holder at the end of a rod holder extender, the ultimate in rod holder functionality and adjustability.

    Compatible Mounts/Holders:
    1. Attaches to all rod/tube holders with female groove pattern.
    2. Attaches to all 1.5" sockets.

    Material:
    High Strength Composite

    Ball Size:
    1.5" Rubber Ball Size

    Note:
    The "U" in the part number reflects product packaged in poly bag.
  • RAM® Tough-Claw™ with 1" Diameter Rubber Ball Quick View
    RAM® Tough-Claw™ with 1" Diameter Rubber Ball

    RAM® Tough-Claw™ with 1" Diameter Rubber Ball

    $ 31.50

    Universal RAM® Tough-Claw™: Powerful Clamping Action for All Your Mounting Needs 
    The RAM® Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round and square bars and rails. The Tough-Claw™ is available with a 1" and 1.5" ball and can be clamped on rails from 0.625" to 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
    RAP-B-400U
  • RAM® Tough-Claw™ with 1.5" Diameter Rubber Ball Quick View
    RAM® Tough-Claw™ with 1.5" Diameter Rubber Ball

    RAM® Tough-Claw™ with 1.5" Diameter Rubber Ball

    $ 35.97

    Universal RAM® Tough-Claw™: Powerful Clamping Action for All Your Mounting Needs 
    The RAM® Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round and square bars and rails. The Tough-Claw™ is available with a 1" and 1.5" ball and can be clamped on rails from 0.625" to 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
    RAP-400U
  • RAP-294U

    RAP-294U

    $ 11.34
    Quick View
    RAP-294U

    RAP-294U

    $ 11.34

    DEFAULT

    RAM 1/5" BALL W/FEMALE SLIP PIPE SOCKET

  • RAP-354-AAPRU Quick View
    RAP-354-AAPRU

    RAP-354-AAPRU

    $ 21.34

    DEFAULT

    RAM SIDE TRACK MOUNT WITH 1.5 BALL

  • RAP-394-SSBMPU Quick View
    RAP-394-SSBMPU

    RAP-394-SSBMPU

    $ 26.08

    DEFAULT

    RAM TOUGH TUBE WITH SHORT PLUNGER MNT

  • RAP-395T-BBU Quick View
    RAP-395T-BBU

    RAP-395T-BBU

    $ 6.87

    DEFAULT

    RAM STACK-N-STOW TOPSIDE W/1"BALL

  • RAP-395T-BCU Quick View
    RAP-395T-BCU

    RAP-395T-BCU

    $ 10.35

    DEFAULT

    RAM STACK-N-STOW TOPSIDE W/1.5"BALL

  • RAP-401U

    RAP-401U

    $ 48.55
    Quick View
    RAP-401U

    RAP-401U

    $ 48.55

    DEFAULT

    RAM LRG TOUGH CLAW W 1.5" BALL

  • RAP-404U

    RAP-404U

    $ 40.43
    Quick View
    RAP-404U

    RAP-404U

    $ 40.43

    DEFAULT

    RAM MED TOUGH CLAW W 1.5" BALL

  • RAP-B-102U-A Quick View
    RAP-B-102U-A

    RAP-B-102U-A

    $ 17.20

    DEFAULT

    RAM-B-102 EVERYTHING MOUNT

  • RAP-B-238U Quick View

    RAP-B-238U

    $ 6.20

    UNPKD RAM 2.5" X 1 5/16" BASE W/ BALL

  • RAP-PP-1118 Quick View
    RAP-PP-1118

    RAP-PP-1118

    $ 6.40

    DEFAULT

    RAM 1.11 od X 18 LONG BLACK PVC PIPE

  • RAP-PPA-FRF75 Quick View
    RAP-PPA-FRF75

    RAP-PPA-FRF75

    $ 4.06

    DEFAULT

    RAM PIPE ADA FEMALE RAME FEMALE 3/4" PIPE

  • RAP-PPA-FRM75 Quick View
    RAP-PPA-FRM75

    RAP-PPA-FRM75

    $ 4.18

    DEFAULT

    RAM PIPE ADAPT FEMALE RAM MAL 3/4" PIPE

  • RAP-PPA-MRF75 Quick View
    RAP-PPA-MRF75

    RAP-PPA-MRF75

    $ 3.93

    DEFAULT

    RAM PIPE ADAPT MALE RAM FEMALE 3/4

  • RAP-PPA-MRM75 Quick View
    RAP-PPA-MRM75

    RAP-PPA-MRM75

    $ 3.56

    DEFAULT

    RAM PIPE ADAPT MALE RAM MALE 3/4" PIPE

  • STACK-N-STOW  Bait Board with Combination Bulkhead Rail Adapter Kit - RAP-395-RMU Quick View
    STACK-N-STOW  Bait Board with Combination Bulkhead Rail Adapter Kit - RAP-395-RMU

    STACK-N-STOW Bait Board with Combination Bulkhead Rail Adapter Kit - RAP-395-RMU

    $ 46.02

    STACK-N-STOW Bait Board with Combination Bulkhead Rail Adapter Kit - RAP-395-RMU

    The bait board with bulkhead rail adapter kit joins two plates with the screws provided and turns the flate base into a rail base. The adapter is a U shape, so it can wrap around a tube mount and the clamp by joining to the flat base. The bait board will also accomodate pipes and extension poles with a diameter of 1".

    Bait Board Dimensions:

    Length: 10"

    Width: 13"

    Depth: 1.625"

    Material:

    High Strength Composite

    Product Number:

    RAP-395U

    Compatible Mounts
  • STACK-N-STOW  Stand Alone Bait Board - RAP-395U Quick View
    STACK-N-STOW  Stand Alone Bait Board - RAP-395U

    STACK-N-STOW Stand Alone Bait Board - RAP-395U

    $ 29.30

    STACK-N-STOW Stand Alone Bait Board - RAP-395U

    The RAM stand alone bait board includes the universal AMPs hole pattern, located on the bottom of the board, easily mount to your existing ball-and-socket mount or choose from an assortment of compatible RAM mounts. The bait board will also accomodate pipes and extension poles with a diameter of 1".

    Bait Board Dimensions:

    Length: 10"

    Width: 13"

    Depth: 1.625"

    Material:

    High Strength Composite

    Product Number:

    RAP-395U

    Compatible Mounts RAP-101U

    RAM-101U

  • YakAttack Rod Holder Combo - CBO-SB15-R114 Quick View
    YakAttack Rod Holder Combo - CBO-SB15-R114

    YakAttack Rod Holder Combo - CBO-SB15-R114

    $ 44.95

    Revolution Rod Holder using the 1 1/2" Ball Mount - Non Composite Base, 2 1/2" in diameter.
    Unlike anything you've seen before, and performance beyond your expectations describes another great product for "Pros and Joes" alike. Integrating two sought after features into a single system makes this new Rod Holder versatile to the extreme. Offering not only the patented RAM Rubber Ball and Socket Feature, but a ratcheting feature as well, there is literally no limit to where this holder can be put or how it can be fished. With RAM, you're never limited by your mounting equipment. No matter whether you're on the water to lose stress or gain tournament dollars, Ram Rod Holders only add to your success. (taken from the RAM website - see the website for a video on this new rod holder - www.ram-mount.com)

    Mounting platform size - 2" x 2 1/2"
    Arm Height - 10"
    Rod Holder Length - 9 1/2"
    ID of Rod Holder - 1 1/4"

    RAM-114-RBU

    CBO-SB15-R114

Join our Mailing List